|
|
|
| |
 |
| • Hollow Paper Drill Bits |
| • Challenge Style |
| • Nygren Dahly - Baum Style |
| • Lassco, Spinnet |
| • Bielomatic Style |
| • Lawson Style |
| • Iram, Sterling Style |
| • Imperial, Lihit, Martin Yale |
| • Cito Borma, Corta, Durselen, Hang, Nagel, Ushida |
| • Pioneer, C&P Style |
| • Seybold Styles |
|
| |
|
| |
Hollow Paper Drill Bits
L.A. Grinding’s heavy duty hollow paper drill bits are made in the USA of one piece construction from the finest quality tool steel. Micro finished on the inside to allow chips to flow easily and reduce clogging. Every drill bit is thoroughly inspected after each machining and finishing process to insure the highest quality product on the market. Packaged in re-closeable plastic tubes for convenience and protection.
Available in Teflon, Flute, and Marvel
Teflon
Most Teflon coated bits may look the same but aren't. LAGCO Teflon coated bits are superior. LAGCO Teflon has a different chemical formulation and is applied differently then other Teflon coated drill bits. LAGCO Teflon bits are tougher and hold up longer. Standard Teflon coated bits showed wear after 50 lifts of drilling; so called premium Teflon coated bits showed wear after 400 lifts; LAGCO Teflon, we stopped testing after 1500 lifts with no real signs of wear!
Fluted
LAGCO fluted drills are designed to handle your toughest stocks. The four flutes force the chips to "cup" tightly so they can flow easily and cleanly up and out of the drill bit. Not recommend for soft stocks. Limited sizes and styles available.
Marvel
LAGCO Marvel drills are carbide coated (also called diamonized). The carbide coating is fused to the outside of the drill bit to give you the longest lasting cutting edge for those really hard to drill stocks. Limited sizes and styles available. |
| |
| back to top |
|
| |
| Challenge Style |
| |
|
| |
|
| Challenge Jumbo Style |
| |
Diameter: |
1/8 |
5/32 |
3/16 |
7/32 |
1/4 |
9/32 |
5/16 |
11/32 |
3/8 |
13/32 |
7/16 |
1/2 |
9/16 |
Drill Capacity 2" style |
1.125" |
1.4" |
1.7" |
1.9" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2½" Cap. |
n/a |
n/a |
n/a |
n/a |
2.5" |
2.5" |
2.5" |
n/a |
2.5" |
n/a |
2.5" |
2.5" |
2.5" |
3" Cap. |
n/a |
n/a |
n/a |
n/a |
3" |
3" |
3" |
n/a |
3" |
n/a |
n/a |
3" |
n/a |
|
| |
| back to top |
|
| |
| Nygren Dahly - Baum Style |
| |
|
| |
Diameter: |
1/8 |
5/32 |
3/16 |
7/32 |
1/4 |
9/32 |
5/16 |
11/32 |
3/8 |
13/32 |
7/16 |
1/2 |
9/16 |
Drill Cap. |
1.125" |
1.4" |
1.7" |
1.9" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
|
| |
| back to top |
|
| |
| Lassco, Spinnet |
| |
|
| |
Diameter: |
1/8 |
5/32 |
3/16 |
7/32 |
1/4 |
9/32 |
5/16 |
5/16 |
3/8 |
7/16 |
1/2 |
Drill Cap. |
1" |
1" |
1" |
1" |
1" |
1" |
1" |
1.5" |
1" |
1" |
1" |
|
| |
| back to top |
|
| |
Bielomatic Style |
| |
|
| |
| back to top |
|
| |
| Lawson Style |
| |
|
| Lawson style 2" |
| |
|
| Lawson style 3" |
| |
Diameter: |
1/8 |
5/32 |
3/16 |
7/32 |
1/4 |
9/32 |
5/16 |
11/32 |
3/8 |
13/32 |
7/16 |
1/2 |
9/16 |
Drill Capacity 2" style |
1.125" |
1.4" |
1.7" |
1.9" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
2.1" |
3" Cap. |
n/a |
n/a |
n/a |
n/a |
3" |
3" |
3" |
n/a |
3" |
n/a |
3" |
3" |
3" |
|
| |
| back to top |
|
| |
Iram, Sterling Style |
| |
|
| |
| back to top |
|
| |
| Imperial, Lihit, Martin Yale |
| |
|
| |
Diameter: |
1/8 |
3/16 |
7/32 |
1/4 |
9/32 |
5/16 |
Style J - Drill Cap. |
1" |
1" |
1" |
1" |
1" |
1" |
Style K (2" style) - Drill Cap. |
1.125" |
1.7" |
1.9" |
2" |
2" |
2" |
|
| |
| back to top |
|
| |
| Cito Borma, Corta, Durselen, Hang, Nagel, Ushida |
| |
|
| |
| back to top |
|
| |
| Pioneer, C&P Style |
| |
|
| |
| back to top |
|
| |
| Seybold Styles |
| |
|
| |
| back to top |
